Problem Faced

             Erosion, corrosion, cavitations in acid or base storage tanks of concrete or metal, acid caring drains.

Solutions

             These coating could be applied on tanks, reservoir, acid caring drains etc. to protect against chemical attack the coatings could sustain a Ph of 1 to 14

Acid tanks

Acid reservoir

Acid Pits

DM Water tanks

Acid carrying pipe lines

Acid drains

RO Tanks

Floors in DM area

Floors near Acids

Etc

Abrasion, erosion and impact resistant.   

Highly chemical resistant    

Very low permeability proven

Fast curing even at low temperature

Resistant to undercutting if damaged

Heat and thermal shock resistant

Ability to be applied in continuous high dry film thicknesses

Morsel Chemical Resistant Coat 5113 is based on sol vented epoxy resins specially formulated to provide a durable coating suitable for application to both vertical and horizontal surfaces. It cures to form a smooth film with good resistance to a wide range of mineral and organic acids, fats, alkalis, oils and chemicals.

Supplied in 3 pack system to ensure consistency and to reduce the risk of site error. Has excellent load bearing, abrasion resistance & chemical resistance properties. Seamless eliminates problems of joints. Gives a non slip surface  & excellent impact resistance can be laid on floor in 3mm to 15mm thick layer.

Morsel 5114 corrosion resistant coating is a two component  polyurethane based coating available in different colors for floor coating coating  is characterized  by - Excellent adhesion to concrete, metal floors, High abrasion resistance, Excellent oil and chemical resistance, Good water resistance, color stability, Excellent UV resistance, Smooth seamless coating-easy to clean

Is solvent  and water-borne coatings combined together to make a complete High Breid system for application to both vertical and horizontal surfaces. It cures to form a smooth film with good resistance to a wide range of mineral and organic acids, fats, alkalis, oils and chemicals .Morsel  HB Coate compromises of :- Morsel  epoxy primer + Morsel 3025  SB acrylic topcoat

Technical Information : Color : Primer   White      Top Coat:  White/Gray/Light Blue    Coating thickness ( finish coats including primer coat) Micron  600 – 700       Elongation at break  % > 500%            Tensile strength Adhesion    N/mm2       > 3 (concrete failure)      Abrasion resistance: Excellent    Coverage in m2/kg of mix quantity       Primer:  (Two coat)   8 - 10     

Top Coat:   3025 HB Coating (Two coats)  2.00 

Compromises of :- Morsel  epoxy primer + Morsel  CS 3027 ( Ceramic Base)

Technical Information : Color : Primer   White                                Top Coat:  Gray    Coating thickness ( finish coats including primer coat)

Micron  600 – 700       Elongation at break  % > 500%            Tensile strength Adhesion    N/mm2       > 3 (concrete failure)      Abrasion resistance: Excellent  Coverage in m2/kg of mix quantity  Primer:   epoxy primer (Two coat)  2- 4     

Top Coat:   3027 HB Coating (Two coats)  1-2  

A two component  coating available in different colors for coating applications. It cures to form a smooth chemical resistant  coating with Extra Glossy Finish as Top Coat

Is designed to protect equipment surface against extreme corrosion caused by chemical exposure. Chemical Resistant Coating forms a glossy, low friction surface that protects against turbulence and cavitations under typical service temperatures of –30 to +80°C

A high performance, two-component barrier coating with outstanding resistance to a broad range of chemicals, especially acids and alkalis. The system, which isolates concrete and metal substrates from deteriorating chemical environments.

A  two component system applied by brush or spray for protection of metallic and nonmetallic surfaces operating under immersion conditions in contact with aqueous solutions.

A two-component non-machine able grade material based on a silicon-steel alloy blended within high molecular weight reactive polymers and ligomers. The system is designed for resurfacing metals and offers protection against the effects of erosion-corrosion in fluid flow systems.

A two-component non-machine able grade material based on a silicon-steel alloy blended within high molecular weight reactive polymers and ligomers .Specially developed for  improving Energy Efficiency in different Pumps.